Callaham Enhanced Tremolo Block US Vintage Repro Left-Handed

Introduction

• Country of Manufacture: USA
• String Spacing: 2-7/32″ (2.219″ / 56.4mm)
• Enhanced Vintage, w/ 10-32 Thread
• Fits left-handed versions of Fender original 1954-1969; US Reissues; Highway 1 (through 2005); Custom Shop Time Machine Series; Jimmie Vaughan Strat; Eric Johnson Strat; Road Worn Strat; MIJ Reissue (CIJ Reissue requires top plate); Classic Series ’50s/60s/70s; WD Exact Vintage; Stew-Mac Vintage

This block fits most American vintage 6-screw bridges. You can use your standard tremolo arm with this block, though a Callaham virtual pop-in arm is strongly recommended for best results.

All Callaham blocks are made of 1018 cold-rolled steel like the vintage originals, which contributes to the sustain and harmonic content that has made these guitars legendary. Replacing a block made of inferior materials (zinc, leaded steel, sintered steel) with one of Callaham’s blocks will get you one step closer to those $30,000 originals. All have a precision-machined top surface that is free of paint to ensure solid metal-to-metal contact with the top plate, for optimal tone.

And all Callaham blocks come with a precision-reamed Delrin insert in the arm hole, allowing the tremolo arm to fit snugly and be free of play, without requiring a spring in the hole, as Fender’s threaded blocks do. This gives you the best tremolo feel available, and no worries about losing springs (in case you’re unaware of it, new Stratocasters ship with a round label over the arm hole in the tremolo – the label’s purpose is to prevent the tiny spring from falling out and being lost). With Callaham’s blocks, the need for a spring is eliminated.

The Delrin bushing is the feature that defines the Enhanced Vintage design. Since Fender’s threaded arms (or any arm with a 10-32 thread, for that matter) can be used with Callaham’s blocks, you are not forced to buy a Callaham arm for use with your Callaham block, but it is highly recommended.